金属丝网橡胶的本构关系

通过对圆环形金属丝网橡胶成型制造过程的分析,在圆环嵌套模型基础上,结合干摩擦非线性理论和小曲梁模型建立了金属丝网橡胶材料的非线性本构关系,对不同相对密度的金属丝网橡胶试件进行了静态压缩实验,通过实验数据确定了本构关系方程的各项系数并实验结果进行比较.研究结果表明:建立的本构关系模型可以很好地描述金属丝网橡胶的非线性力学特性,实验结果能够较好地符合理论结果,并且该模型反映了相对密度、网格大小和网格宽度等参数的影响,从而实现了对材料结构刚度的预估.      

固体火箭发动机流体喉部推力矢量特性

针对采用水作为二次流工质的流体喉部进行了冷流实验及数值模拟研究.研究了该种固体火箭发动机流体喉部的一般规律,包括不同二次流射流方式,不同二次流流量下流体喉部的扼流性能,推力偏角及推力效率,数值模拟及实验结果吻合较好.结果表明:扼流性能与二次流的注射位置、注射角度及流量比有关,且随二次流/主流流量比的增大而增大.喉部二次流喷射能有效的调节有效喉部面积进而调节推力大小,当流量比为0.4时,最大有效喉部面积比为0.8;扩张段二次流喷射能有效调节推力方向,当流量比为0.4时,最大推力偏角为20°;喉部二次流与扩张段二次流入射位置存在相位差可有效降低喉部与扩张段二次流干扰.      

Nonlinear dynamic modeling of a helicopter planetary gear train for carrier plate crack fault diagnosis

Planetary gear train plays a significant role in a helicopter operation and its health is of great importance for the flight safety of the helicopter. This paper investigates the effects of a planet carrier plate crack on the dynamic characteristics of a planetary gear train, and thus finds an effec-tive method to diagnose crack fault. A dynamic model is developed to analyze the torsional vibra-tion of a planetary gear train with a cracked planet carrier plate. The model takes into consideration nonlinear factors such as the time-varying meshing stiffness, gear backlash and viscous damping. Investigation of the deformation of the cracked carrier plate under static stress is performed in order to simulate the dynamic effects of the planet carrier crack on the angular displacement of car-rier posts. Validation shows good accuracy of the developed dynamic model in predicting dynamic characteristics of a planetary gear train. Fault features extracted from predictions of the model reveal the correspondence between vibration characteristic and the conditions (length and position) of a planet carrier crack clearly.     

Simultaneous state and actuator fault estimation for satellite attitude control systems

In this paper, a new nonlinear augmented observer is proposed and applied to satellite attitude control systems. The observer can estimate system state and actuator fault simultaneously. It can enhance the performances of rapidly-varying faults estimation. Only original system matrices are adopted in the parameter design. The considered faults can be unbounded, and the proposed augmented observer can estimate a large class of faults. Systems without disturbances and the fault whose finite times derivatives are zero piecewise are initially considered, followed by a discussion of a general situation where the system is subject to disturbances and the finite times derivatives of the faults are not null but bounded. For the considered nonlinear system, convergence conditions of the observer are provided and the stability analysis is performed using Lyapunov direct method. Then a feasible algorithm is explored to compute the observer parameters using linear matrix inequalities (LMIs). Finally, the effectiveness of the proposed approach is illustrated by considering an example of a closed-loop satellite attitude control system. The simulation results show satisfactory perfor-mance in estimating states and actuator faults. It also shows that multiple faults can be estimated successfully.     

Parachute dynamics and perturbation analysis of precision airdrop system

To analyze the parachute dynamics and stability characteristics of precision airdrop system,the fluid–structure interaction(FSI) dynamics coupling with the flight trajectory of a parachute–payload system is comprehensively predicted by numerical methods.The inflation behavior of a disk-gap-band parachute is specifically investigated using the arbitrary Lagrangian–Euler(ALE) penalty coupling method.With the available aerodynamic data obtained from the FSI simulation,a nine-degree-of-freedom(9DOF) dynamic model of a parachute–payload system is built and solved to simulate the descent trajectory of the multi-body dynamic system.Finally,a linear five-degree-of-freedom(5DOF) dynamic model is developed,the perturbation characteristics and the motion laws of the parachute and payload under a wind gust are analyzed by the linearization method and verified by a comparison with flight test data.The results of airdrop test demonstrate that our method can be further applied to the guidance and control of precision airdrop systems.     

基于动态逆-滑模的高速飞行器控制器设计

吸气式高超声速飞行器巡航状态下飞行环境复杂,建模时存在非线性以及参数摄动.基于小扰动假设的传统经典控制理论难以适应当前任务对鲁棒性的要求,对此提出了一种非线性动态逆-滑模控制律改进方法.通过对吸气式高超声速飞行器模型精确反馈线性化得到解耦形式的线性方程,为速度和高度设计出动态逆控制律来抵消非线性特性,在动态逆的基础上采用滑模变结构来补偿参数摄动带来的误差.仿真结果表明,所设计的控制方法具有良好的动态性能及鲁棒性.     

燃料分级对旋流火焰的动态特性影响研究

为深入研究分级旋流火焰特性,以分级旋流模型燃烧室为研究对象,对四个不同燃料分级比(Rf)条件下的分级旋流火焰进行了数值研究,在时均燃烧场特性分析的基础上进一步对燃料分级比为1和3两个工况进行了基于壁面建模的大涡模拟(WMLES)研究。结果表明:燃料分级比的改变会影响中心回流区(CRZ)的长度和宽度。燃烧室中截面的散点分布图能够显示出不同燃料分级比条件下的燃烧特征。燃料分级比为1时,燃烧室剪切层仅存在零散的涡破碎区;而燃料分级比为3时,伴随涡破碎区还出现了单螺旋分支进动涡核(PVC)。通过FFT变换获得的燃烧室内剪切层速度能谱主频与进动涡核的旋转频率相同,表明内剪切层速度脉动的产生与进动涡核有关。另外进动涡核会使流场内的燃料分布和燃烧模式发生周期性的变化,进而影响燃烧过程。调整燃料分级比在1附近,能够使分级火焰达到稳定燃烧降低排放的目标。     

斜面兜孔圆柱滚子轴承的高速防打滑特性

为解决航空发动机主轴圆柱滚子轴承的打滑问题,提出一种具有斜面兜孔结构的圆柱滚子轴承,并对其高速防打滑特性展开研究。利用Hertz接触理论及弹流润滑、流体动力润滑的经验公式,建立了滚子-内外套圈滚道、兜孔-滚子、保持架-外圈引导面的接触模型。运用多体运动学及牛顿-欧拉动力学理论,建立了轴承径向平面内的三自由度动力学模型,在此基础上,利用龙格库塔数值积分法进行了轴承的动力学数值仿真,探讨了兜孔前后壁倾角对轴承打滑的影响规律,分析了兜孔前壁倾角为5°、后壁倾角为10°下轴承的高速打滑特性,结果表明：兜孔的前后壁倾角对轴承打滑有显著影响,通过对其进行优化,可有效抑制轴承的高速打滑。     

主流攻角对双射流孔气膜冷却特性的影响

应用压力敏感漆技术,在平板上测量了不同主流攻角(i=-30°,-20°,-10°,0°,10°,20°,30°)下双射流孔的气膜冷却效率,并利用计算流体动力学(CFD)计算得到的流场对气膜冷却效率的规律进行了解析。所研究的双射流孔结构的孔间无量纲横向距离为0.5,孔间无量纲流向距离为3;射流与主流密度比为1.0,吹风比分别为0.5、1.0、1.5、2.0。结果表明小的主流攻角(i=-10°,0°,10°)下,流场中存在反肾型涡对或挤压作用,气膜层与壁面贴附良好,气膜冷却效率最高;大正值攻角(i=20°,30°)下,虽然气膜覆盖面积大,但反肾型涡对退化,气膜冷却效率下降;大负值攻角(i=-20°,-30°)下,流场中有肾型涡对,且气膜横向覆盖受限,气膜冷却效率最低。     

带非线性支撑的转子有限元模型求解方法

用数值方法研究了非线性支撑的柔性转子系统的动学行为,提出了一种将有限元与非线性支撑结合的模型和求解方法。利用有限元法(FEM)构建转轴和转盘部分的模型,通过矩阵进行组合;利用离散元方法对包含滚动轴承和挤压油膜阻尼器(SFD)的支撑部分进行建模,此部分包含4个单元,分别为轴承内圈、外圈、SFD内圈和支撑鼠笼。有限元部分和离散元部分通过轴端节点相连,仿真过程中轴端位移传递给非线性支撑部分,支撑部分通过位移计算得到的非线性力反过来作用于有限元转子轴端部分。为了耦合求解有限元转子和非线性支撑组成的数学模型,提出了一种综合的迭代求解方法,克服传统的有限元求解方法对轴端隐性非线性支撑的求解局限性。由于转轴部分采用了Timoshenko梁单元建模,对比与简单转子模型,可以考虑陀螺力矩和轴的柔性特征,更能体现非线性支撑对振动真实影响。在建立的20个轴单元的有限元转子模型中,非线性响应更多体现在靠近非线性支撑的节点1和节点21处,响应频谱中靠近轴端的节点能体现出滚动轴承的2倍和3倍变柔振动频率。